BDWLG - 745480 ENAMEL ALKYD SG BAKING O.D
- MSDS: BDWLG
- Manufacturer: PRATT AND LAMBERT
- Product Name: 745480 ENAMEL ALKYD SG BAKING O.D
- National Stock Number: 8010-00-298-3865
Product Identification
Product ID:745480 ENAMEL ALKYD SG BAKING O.D
MSDS Date:01/01/1985
FSC:8010
NIIN:00-298-3865
MSDS Number: BDWLG
Responsible Party
WICHITA, KS 67201
US
Cage: PRATT
Contractor
Telephone: 216-566-2902
Cage: 61196
Ingredients
NAPHTHA (PETROLEUM SPIRITS OR BENZIN)
CAS: 8030-30-6
RTECS: SE7555000
Fraction By Weight: 25%
OSHA PEL 100 PPM
ISOBUTYL ALCOHOL (SARA III)
CAS: 78-83-1
RTECS: NP9625000
Fraction By Weight: 15%
OSHA PEL 100 PPM
ACGIH TLV: 50 PPM; 9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
TRIETHYLAMINE (SARA III)
CAS: 121-44-8
RTECS: YE0175000
Fraction By Weight: <0.5%
OSHA PEL 25 PPM/15 STEL
ACGIH TLV: 10 PPM/15 STEL; 9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
LEAD CHROMATE (OSHA PEL FOR LEAD FROM 29CFR
CAS: 7758-97-6
RTECS: GB2975000
OSHA PEL 0.05 MG/M3 (PB)
ACGIH TLV: 0.05MG/M3(CR)A2;8990
NORMAL BUTYL ALCOHOL
RTECS: EO1575000
Hazards
Effects of Overexposure:INHAL:ANEST,IRRIT OF THE RESPIRATRY TRACT OR
ACUT NERV SYS DEPRESSION:HDACHE,DIZZ,STAGRNG GAIT,COMA.
First Aid
First Aid:SKN OR EYE CONTCT:PRIMARY IRRITATION:IN CASE OF CONTCT,FLUSH
SKN & EYES W/PLENTY OF WATER WHILE REMOVING CONTAM CLOTHING.IF
INHALED,REMOV TO FRESH AIR. CALL DR IF SYMPTOMS PERSIST.
Fire Fighting
Flash Point:44 F TCC 7 C TCC
Extinguishing Media:CO*2,DRY CHEM OR ALCOH FOAM,POLYMR FOAM PREFER F/LG
FIRES
Fire Fighting Procedures:SELF-CONTNED BREATHING APPARAT SHLD BE AVAIL
F/FIREMEN.
Unusual Fire/Explosion Hazard:KP CONTNRS TIGHTLY CLOS.ISOLAT FR
HEAT,ELECTR EQPMT,SPARK & OPN FLAME.CLOS CONTNRS MAY EXPLODWHN(SUP
Accidental Release
Spill Release Procedures:REMOV ALL SOURCES OF IGNITION (FLAMES,HOT
SURFACES,& ELECTRICAL, STATIC OR FRICTIONAL SPARKS).AVOID BREATHING
VAPORS.VENTILAT AREA.REMOV W/INERT ABSORBENT & NON-SPARKING TOOLS
Handling
Handling and Storage Precautions:DO NOT STORE ABOVE 120 F.STORE LG
QUANTITIES IN BLDG DESIGNED TO COMPLY W/OSHA 1910.106.
Other Precautions:CONTNRS SHLD BE GROUNDED WHN POURNG.AVD FRE FALL OF
LIQD IN EXCES OF FEW INCHES.DO NOT FLAM CUT,BRAZ OR WELD COATED
MATERL W/O BUR/MNES APPRVD RESPIRTR/APPROPVENT.AD LABL WARN-DO NOT
TAKE INTE
Exposure Controls
Respiratory Protection:MECH FILTER RESPIRAT TO REMOV SOLID AIRBORN
PARTICL/OVERSPRAY INDOR
Ventilation:LOC. EXHAUS VENTIL TO KP TLV OFHAZ INGRED BELOW ACCEPT
LIMIT
Protective Gloves:F/PRLNG/REPEAT
Eye Protection:SAFETY EYEWR AGNST SPLASH
Other Protective Equipment:PREVNT PRLNGED SKN CONTCT TO CONTACT TO
CONTAMINAT CLOTHING
Supplemental Safety and Health
UNUS FIRE/EXPLOS HAZ:EXPOSED TO EXTREME HEAT.DO NOT APPLY TO VERY HOT
SURFACES.
Chemical Properties
HCC:F2
Boiling Pt:B.P. Text:223-290 F
Vapor Density:HEAV
Evaporation Rate & Reference:SLOWER THAN ETHER
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:FIRES,HEAT & HOT SURFACES
Disposal
Waste Disposal Methods:IN ACCORDANCE W/LOC, STATE & FEDERAL
REGULATIONS.INCINERATE IN APPRVD FACILITY. DO NOT INCINERATE CLOSED
CONTNRS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.